Includes 6 saw blades (7/8", 1-1/8", 1-3/8", 1-3/4", 2", 2-1/2") and 2 arbors (MA34, MA45PS) With Molded plastic case. 

For ferrous and non-ferrous metals, wood, drywall, and composites

FEATURES:

• Cutting depth is 1-1/2" (38mm). 
• Backer, cutting edge and cap work together to provide faster, longer lasting cutting action
• Positive rake teeth clear chips better for longer life and easier cutting
• Bi-metal design bonds M3 cutting edge to fatigue resistant backer
• Teeth stay sharper and make smoother cuts
•  

WS107 107 pc. Assortment Wire Connector (comes in plastic case) .Grey 22 pcs,blue 14 pcs,orange 20 pcs,yellow 16 pcs,red 10 pcs and ivory 25 pcs.

Replace worn or broken plugs to bring new life back to power tools, appliances & extension cords.

Process takes just couple of minutes with easy-to-use internal galvanized steel screw-posts

Heavy-duty rubber cover with galvanized steel clamp to keep cord secure & wires from pulling out 3-prong plug

With positive/negative posts

Ground Rated 125VAC/15A

female plug also available

NYLON 3 PRONG CONNECTOR

Perfect for watch & electronics repair where canned or compressed air can damage delicate parts.

FEATURES:

• Genuine rubber bulb with air valve
• Precision solid brass nozzle for exact placement
• No canned propellant or moisture from your breath
• Force of air controlled by strength of hand-squeeze
• Thin nozzle points a precise high-velocity puff of air

HOW TO USE:

• Squeeze for air jet, release & bulb refills
• Thin nozzle points a precise high-velocity puff of air for cameras, jewelry, watches, clocks, models, miniatures, carvings
• Use to clear dust or debris from delicate work areas
• For cameras, jewelry, watches, clocks, models, miniatures, carvings

SPECS:

• Measures 2-1/4" diameter x 4" length
• Will not crack and chip
• Metal nozzle delivers precise air to specific location

91040 MULTI PURPOSE LIGHTER . Refillable butane. Child resistant. Reaches tight places. One action.

• Checks AC and DC wiring up to 36 volts
• Use to check series-parallel switches and solenoids on tractor-trailer starter systems
• An absolute must for the trucking, farm, heavy equipment and trailer industries
• 48" ground wire

S & G TOOL AID WIRE STRIPPER HANDLES 12-22 GAUGE WIRE

FEATURES:

• Handles single or multiple conductor wire
• Automatically adjusts to wire size
• Cuts and strips solid or stranded 12-22 gage wire
• Handles single or multiple conductor wire
• Easy to use - yields clean, nick-free results every time
• Not designed to strip Teflon or similar insulations

SPECS:

• Wire Stripper
• Type: Adjust
• Wire Type: Solid/Stranded
• Minimum Wire Size: 22 Gauge
• Maximum Wire Size: 12 Gauge

• Outlet swivel wall tap.
• Swivel tap Redirects cords out of the way.
• 15A / 125V 1875W
• Converts 1 plug into 3
• White

26100 28PC ELECTRICAL CLIP SET . Product Features Repair broken leads on test equipment and chargers Make your own low voltage jumper leads

• Application: suitable wire A.W.G.: 22-4.
• Temperature rated at 105 degrees

Color Coded

• Blue, orange, yellow rated at 300 volts
• Red rated at 600 volts

26050 12PC INSULATED ALLIGATOR CLIP

Color coded Color coating leads allow you to test circuits without crossing wires or causing short circuit.

10 leads with alligator clips in 10 distinct colors.

Features:

• 19-1/2” in Length
• Insulated copper wire
• Solid bra wire size: 26 AW
• 5 colors with booted alligator clips on both ends

• Convenient 50 ft. cord: You won't have to constantly unplug the portable trouble light with cord and move it to a new outlet thanks to the heavy-duty 50 ft. cord
• Easy use: includes a simple off/on switch situated at your fingertips and an easily visible orange cord for safe and convenient use when temporary lighting is required
• Grounded side outlet: a handy grounded side outlet lets you use this trouble light as an extension cord when other tools or appliances are close by
• Durable metal cage and hook: the durable metal cage/bulb guard protects the light bulb from breakage, a built-in metal hook allows for hanging and hands-free convenience
• Use with a 75-Watt bulb: this trouble light accommodates light bulbs up to 75-Watt (not included), so there will be plenty of light to illuminate your workspace
• This portable handheld light has a metal bulb guard.
• Metal grounded swing-open bulb guard with hanging hook

26050 S&G Tool Aid High and Low Voltage Circuit Tester . Two electrical testers in one! Trouble shoots both primary and secondary circuits. Checks spark plugs,plug wires and distributor cracks. Test for shorts,grounds and open circuits with power on for 6 and 12 volt systems. The best available value in a circuit tester. Made of durable,non-conductive plastic.

26025 S&G Tool Aid 24-40 Volt Circuit Tester

• The crimper is used for both insulated and non-insulated terminals
• Perfectly mated cutter, heat treated to hold its edge
• Durable and smooth operating box joint construction
• A useful crushing area between handles and joint
• Electrocoated protective finish to prevent rusting
• Cross-hatched jaw tip for maximum gripping
• CHANNELLOCK® uses high-carbon C1080 steel for superior performance on the job and electronic coating for ultimate rust prevention
• CHANNELLOCK BLUE® grips for comfort
•  

CHANNELLOCK® Round Nose Linemen's Pliers feature Xtreme Leverage Technology (XLT™) which positions the rivet closer to the cutting edge to make cutting easier than ever. State-of-the-art laser heat treating offers a strong and consistent pattern across the cutting edge, adding increased strength and longevity over traditional hardening practices. Crosshatch jaws provide maximum grip and longevity. A precision-machined knife and anvil style cutting system ensures perfect mating. CHANNELLOCK® Linemen's Pliers are made in USA and forged from high carbon U.S. steel that is specially coated for ultimate rust prevention.

• XTREME LEVERAGE TECHNOLOGY (XLT™) increases performance and reduces hand fatigue
• LASER heat-treated cutting edges perform better and last longer
• CUTS ACSR
• CROSSHATCH TEETH to provide maximum grip
• PRECISION-machined knife and anvil style cutting edges ensure perfect mating for superior performance and longevity
• FORGED high carbon U.S. steel for ultimate strength and durability is specially coated for ultimate rust prevention
• CHANNELLOCK BLUE® grips for comfort
• 100% MADE IN USA

CHANNELLOCK® 911 9.5" Cable Cutting Pliers feature an improved high alloy steel for strength and durability. Easily cut through battery cables and other soft metals and cable up to 4/0 aluminum and 2/0 copper. These pliers are not intended for cutting steel or ACSR. The CHANNELLOCK® model 911 is made in USA and forged from high alloy steel that is specially coated for ultimate rust prevention.

FEATURES:

• IMPROVED high alloy steel construction and a unique cable cutting design easily cuts through battery cables and other soft metals and cables up to 4/0 aluminum and 2/0 copper
• FORGED high alloy steel for ultimate strength and durability is specially coated for ultimate rust prevention
• NOT intended for cutting steel or ACSR
• CHANNELLOCK BLUE® grips for comfort

CHANNELLOCK® Long Reach Pliers are specifically designed for those hard-to-reach jobs.

• LONG REACH
• DIAGONAL side cutter
• DESIGNED for long reach applications and hard to reach spaces
• FORGED high carbon U.S. steel for maximum strength and durability is specially coated for ultimate rust prevention
• CHANNELLOCK BLUE® grips for comfort
• LASER heat-treated cutting edges perform better and last longer
• PRECISION-machined knife and anvil style cutting edges ensure perfect mating for superior performance and longevity